MAX L Protective Cap with 19.7mm height and 12.8mm diameter, suitable as a replacement protective component for compatible MAX fiber laser source applications.
MAX L Protective Cap for Fiber Laser Source Output Connector
The MAX L Protective Cap is the taller cap variant in the MAX range, sized at 19.7mm height x 12.8mm diameter. It fits the output connector of compatible MAX-series fiber laser sources, covering the collimating window behind it whenever the output optical cable is disconnected.
The MAX L cap's extra height compared to shorter variants in the same range corresponds to the specific output-connector design it is built for, which is why it is specified for certain MAX source models. Like the other caps in the range, its job is to keep the collimating window at the output connector free of dust and contamination whenever the delivery cable is unplugged - during transport, storage or servicing. Units running MAX-source machines in daily production typically keep this size on hand once they have confirmed it matches their source's output port.
Key Features of the MAX L Protective Cap
Sized at 19.7mm height x 12.8mm diameter
Taller profile than the MAX H9.5, HH and HHH cap variants
A 19.7mm x 12.8mm cap sized for the "L" variant output connector in the MAX range, built to seat over the port of compatible sources.
Benefits
Protects the collimating window at the connector from dust and contamination, and keeps replacement quick once fitment is confirmed.
How to Confirm You Need the L Size
Check your laser source brand and model against the MAX range.
Measure the existing cap: it should read close to 19.7mm height x 12.8mm diameter.
Compare against the H9.5, HH and HHH variants if your reading is different.
Inspect the current cap for cracking, warping or a missing seal before ordering.
Confirm fitment with the supplier before placing a bulk order.
Why Choose Us
Correctly sized to the L variant - not an approximate fit
Ready stock to reduce laser source downtime
GST-registered supplier (GSTIN 24AFSFS3212F1Z2) with proper invoicing
WhatsApp support to confirm the right cap size for your source
Bulk pricing for units running multiple machines
Correctly Sized L Cap vs an Approximate-Fit Cap
Parameter
Correctly Sized MAX L Cap
Approximate / Mismatched Cap
Dimension Match
19.7mm x 12.8mm, exact
Close but not exact
Seating on Connector
Sits flush, no gap
Loose fit or forced fit
Window Protection
Consistent dust seal
Gaps can let dust through
Replacement Ease
Drop-in swap
May need adjustment
Frequently Asked Questions
It covers the output connector of a compatible MAX fiber laser source, protecting the collimating window inside from dust whenever the output cable is disconnected.
19.7mm height x 12.8mm diameter - the tallest of the MAX cap variants listed.
The laser source. It caps the source's output connector, not the cutting head nozzle.
Replace it if it is cracked, warped, or lost, since an exposed collimating window is then at risk from dust.
Yes, bulk quantities are available with a GST invoice for business buyers.
Get the Right MAX L Protective Cap for Your Laser Source
Confirm fitment and order the correctly sized MAX L output-connector protective cap for your fiber laser source, with bulk pricing and pan-India delivery.
