MAX HHH Protective Cap with 16.8mm height and 13mm diameter, suitable as a replacement protective component for compatible MAX fiber laser source applications.
MAX HHH Protective Cap for Fiber Laser Source Output Connector
The MAX HHH Protective Cap is sized at 16.8mm height x 13mm diameter, matching the "HHH" variant output connector in the MAX range. It fits over the output connector of compatible MAX-series fiber laser sources and shields the collimating window behind it whenever the output optical cable is disconnected.
The HHH designation sits alongside the H9.5, L and HH sizes in the MAX range, and is specified when a source's output connector calls for this particular height and diameter combination. As with the other variants, its function is straightforward: keep dust off the collimating window at the connector whenever the delivery cable is unplugged, whether that is during transport, storage or servicing. It is meant to be checked as part of routine maintenance rather than assumed to always be in place.
Key Features of the MAX HHH Protective Cap
Sized at 16.8mm height x 13mm diameter
Matches the "HHH" variant output connector in the MAX cap range
A 16.8mm x 13mm cap sized for the HHH variant output connector, built to seat over the port of compatible MAX sources.
Benefits
Protects the collimating window at the connector from dust and contamination, and keeps replacement quick and predictable for maintenance teams.
How to Confirm You Need the HHH Size
Check your laser source brand and model against the MAX range.
Measure the existing cap: it should read close to 16.8mm height x 13mm diameter.
Compare against the H9.5, L and HH variants if your reading is different.
Inspect the current cap for cracking, warping or a missing seal before ordering.
Confirm fitment with the supplier before placing a bulk order.
Why Choose Us
Correctly sized to the HHH variant - not an approximate fit
Ready stock to reduce laser source downtime
GST-registered supplier (GSTIN 24AFSFS3212F1Z2) with proper invoicing
WhatsApp support to confirm the right cap size for your source
Bulk pricing for units running multiple machines
Correctly Sized HHH Cap vs an Approximate-Fit Cap
Parameter
Correctly Sized MAX HHH Cap
Approximate / Mismatched Cap
Dimension Match
16.8mm x 13mm, exact
Close but not exact
Seating on Connector
Sits flush, no gap
Loose fit or forced fit
Window Protection
Consistent dust seal
Gaps can let dust through
Replacement Ease
Drop-in swap
May need adjustment
Frequently Asked Questions
It covers the output connector of a compatible MAX fiber laser source, protecting the collimating window inside from dust whenever the output cable is disconnected.
16.8mm height x 13mm diameter, matching the HHH variant.
The laser source. It caps the source's output connector, not the cutting head nozzle.
Replace it if it is cracked, warped, or lost, since an exposed collimating window is then at risk from dust.
Yes, bulk quantities are available with a GST invoice for business buyers.
Get the Right MAX HHH Protective Cap for Your Laser Source
Confirm fitment and order the correctly sized MAX HHH output-connector protective cap for your fiber laser source, with bulk pricing and pan-India delivery.
