MAX HH Protective Cap for Fiber Laser Source Output Connector
The MAX HH Protective Cap is sized at 18.8mm height x 13.2mm diameter, matching the "HH" variant output connector used on compatible MAX-series fiber laser sources. It fits over the connector and shields the collimating window behind it whenever the output optical cable is disconnected.
Within the MAX cap range, the HH variant sits between the shorter H9.5 size and the L and HHH options, and is specified for source models whose output connector calls for this exact height and diameter. Its role is the same as any output-connector cap on a fiber laser source: keep the collimating window free of dust whenever the delivery cable is unplugged, since that window is directly exposed to the surrounding air without the cap in place. Units running MAX-source machines typically treat it as a routine spare, checked whenever the output cable is handled during maintenance.
Key Features of the MAX HH Protective Cap
Sized at 18.8mm height x 13.2mm diameter
Matches the "HH" variant output connector in the MAX cap range
An 18.8mm x 13.2mm cap sized for the HH variant output connector, built to seat over the port of compatible MAX sources.
Benefits
Protects the collimating window at the connector from dust and contamination, and keeps replacement quick and predictable for maintenance teams.
How to Confirm You Need the HH Size
Check your laser source brand and model against the MAX range.
Measure the existing cap: it should read close to 18.8mm height x 13.2mm diameter.
Compare against the H9.5, L and HHH variants if your reading is different.
Inspect the current cap for cracking, warping or a missing seal before ordering.
Confirm fitment with the supplier before placing a bulk order.
Why Choose Us
Correctly sized to the HH variant - not an approximate fit
Ready stock to reduce laser source downtime
GST-registered supplier (GSTIN 24AFSFS3212F1Z2) with proper invoicing
WhatsApp support to confirm the right cap size for your source
Bulk pricing for units running multiple machines
Correctly Sized HH Cap vs an Approximate-Fit Cap
Parameter
Correctly Sized MAX HH Cap
Approximate / Mismatched Cap
Dimension Match
18.8mm x 13.2mm, exact
Close but not exact
Seating on Connector
Sits flush, no gap
Loose fit or forced fit
Window Protection
Consistent dust seal
Gaps can let dust through
Replacement Ease
Drop-in swap
May need adjustment
Frequently Asked Questions
It covers the output connector of a compatible MAX fiber laser source, protecting the collimating window inside from dust whenever the output cable is disconnected.
18.8mm height x 13.2mm diameter, matching the HH variant.
The laser source. It caps the source's output connector, not the cutting head nozzle.
Replace it if it is cracked, warped, or lost, since an exposed collimating window is then at risk from dust.
Yes, bulk quantities are available with a GST invoice for business buyers.
Get the Right MAX HH Protective Cap for Your Laser Source
Confirm fitment and order the correctly sized MAX HH output-connector protective cap for your fiber laser source, with bulk pricing and pan-India delivery.
